Serpent 190mm 1/10 scale ready-to-Race Touringcar, based on the successful 411 race-cars.

Factory assembled.
Premounted race-wheel-tyres.
Pre-cut and prepainted body.
Dragon-RC electronic speedo.
Dragon-RC brushless 9T motor.
Dragon-RC 2.4ghZ transmitter.

INTRODUCTION:

The full package to start racing in the electric touringcar category

The Serpent 411 Ready-to-race offers a complete package to enjoy running anywhere outdoors on even surfaces / parkinglots, even join any indoor, outdoor race or just race anywhere for fun.

PROMO VIDEO:

SERPENT HERITAGE:

Serpent has started developing and manufacturing of rc cars in 1980 in the Netherlands, Europe and has expanded the rc car program ever since !  Serpent has won mulitple World Championships, as well as European, American and Asian Championship titles. Michael Salven is head of design for all onroad Serpent cars, as has been racing all his life, and won World and European Championship titles, as well as many German national titles.   His experience and knowledge has also been used to design this new Serpent 411 RTR car, as the Serpent entry-level touring car racer.  Michael has worked together with Topdriver Marc Fischer and a number of test-drivers to develop this superb package.

TRANSMITTER AND RECEIVER:

The 411-RTR comes with this fine Dragon-RC lightweight steeringwheel type 2.4 GHz transmitter (TX). The Dragon-RC transmitter set comes complete with the supersmall and light Dragon-RC receiver (RX), which is supereasy to bind.   The fast and powerfullDragon-RC  MG servo 6kg  is pre-installed with a servo-saver and connected, All ready to race .

RF range: 2.405-2.475GHz
Bandwidth: 500KHz
Band sum: 141
RF power: less than 20dBm
2.4G system: AFHDS
Code type: GFSK
Antenna length: 26mm
RX sensitivity: -98dBm

SPEED CONTROLLER AND BRUSHLESS MOTOR:

The Dragon-Rc electronic speedcontroller is a 35A unit, with nice cooler and cooling fin mounted on the top. The premounted and pre-set speedo offers really smooth accelaration and great midrange and topspeed.  The speedo combines very well with the powerfull Dragon-RC  9-turns 3650kv  brushless sensorless motor, which will give amazing performance. It wil need good throttle control  !   The speedo and motor can be powered  with NIMH and LIPO packs. 

SERVO:

Dragon-Rc digital servo 0.13s - 6kg 

CHASSIS:

Supernarrow, symmetrical , durable black glass-fibre  chassisplate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for geardiff, spool and spur.

TOPDECK:

Durable black glass-fibre topdeck with optimised flex design.
Battery-mount brackets and  Lipo-holders
Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The Lipoholders will securely keep the Lipo in place, also at hard impact. 

SERVO-MOUNT:

The servo is mounteded on a seperate plate, so flex is less influenced.  

SHOCK TOWER FRONT:

Black glass fibre  shocktower with  3 upper shock mounting holes to choose from . Holes for an extra central bodypost are already made as well.

C-HUB / STEERINGBLOCK:

FRONT BRACKET:

Machined alumnium front brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon.

FRONT SUSPENSION:

Durable lower front wishbones connected to the inner brackets with strong steel pivot pins.  An anti-roll bar system can be mounted as option

SHOCK TOWER REAR:

Black glass fibre  shocktower with  4 upper shock mounting holes to choose from . The rear bodyposts are mounted to the top of the rear shocktower.

REAR BRACKET:

REAR SUSPENSION:

Durable lower rear  wishbones connected to the inner brackets with strong steel pivot pins.  An anti-roll bar system can be mounted as option.

REAR UPRIGHTS:

BODY MOUNT:

Front bodymount is mounted through the front bumper, and the rear ones are seated on the shocktower. Multiple bodyposiiton holes to choose from. 

MOTOR MOUNT:

Machined aluminium  motormount  / middle shaft support.

MIDDLE SHAFT:

Ballraced middle shaft  with 2 small pully’s and  the main Serpent spur gear.

BUMPER:

GEAR DIFF:

Very compact ballraced geardifferential in the rear, with steel gears and axles for durablity. Supersmooth.

SPOOL:

Front nylon lightweight spool with screw mounted front gearpully 

TRANSMISSION / BELTS / PULLIES:

Smooth low friction fine pitch  belts combined with optimised nylon pullys.

DRIVESHAFT / WHEELHEX / WHEELAXLE:

Steel driveshafts, combined with ballraced wheelaxles  and nylon wheel-hex adaptors

STEERING SYSTEM:

Steering system with  optimised ackermann for neutral steering-feeling. 

SHOCK ABSORBERS:

Latest type RCM  competition shockabsorbers  with membrames and checked colorcoded race springs.

BALL BEARINGS:

Fully ballraced with oiled high speed sealed stainless steel bearings. 

TYRES / WHEELS:

The 411-RTR is fitted with Dragon-RC rubber racing tyres with foam inlays on Serpent TC wheels for super-grip.

BODY:

The EFRA approved  1/10 scale Serpent TC body Lex-is fitted, fully pre-cut and prepainted in a superb paintjob with 4 colors.

MANUAL AND DECALS:

Full color owners manual with info on car and electronics, has all exploded views  for easy parts-finding and  detailed list with spare parts and optionals.  Decal-sheet with Serpent and 411 logo’s are included as well.

PACKING:

The 411 RTR comes in a strong carton box with full color printing.

SERVICE AND SUPPORT:

The Serpent distributor, dealer or agent is your source for more info, but also the Serpent website and the member section and the Youtube channel provides lots of information.

OPTIONALS / UPGRADING:

The Serpent 411 Sport is based on the high end race version of the 411.  All parts from the 411 race-version and also all optionals, alsof fit  the  411 Sport.  This allows you to upgrade your  411 Sport  to a higher level race spec step by step, with the parts  you  select.  The 411 Sport parts manual  shows those parts, and you can find them in the optionals section of the 411 Sport as well. 

ELECTRICS:

The 411 RTR comes with:

Dragon-RC electronic 35A speedcontroller
Dragon-RC brushless motor 9T 3650 kv, non sensored

TRANSMITTER / RECEIVER / SERVO:

Dragon-RC DTS-1 digital 2.4 gHz transmitter  with large LCD screen, pistol-type.
Dragon-RC digital receiver in 2.4 gHz
Dragon-Rc digital servo 0.13s - 6kg 

The Serpent 411 Ready-to-race offers a complete package to enjoy running anywhere outdoors on even surfaces / parkinglots or even join any indoor or outdoor race. 

Team Serpent

OPTION PARTS:

Chassis carbon 2.5mm

Topdeck carbon 2mm

Steeringrack V2

Shocktower carbon rear

Motormount S411 V3

Solid axle alu S411 mono for blades

Servomount plate