Serpent SPYDER 2wd ready to race 1/10 scale, electric powered Short Course Truck , rear motor

Serpent introduces the Spyder 1/10 rear motor Short Course Truck in a true Ready to Race version.!

Ready to race
Prepainted and precut SC body
Dragon-RC 2.4GHz transmitter with 10 car memory, advanced set-up
possibilities, large LCD screen.
Combined with supersmall receiver.
Waterproof Dragon-RC Electronic speedcontroller 45A
Powerful Dragon-RC Brushless, sensorless motor 9T.
Expert factory assembly and set-up
Dragon-RC premounted SCT tyres on spoked SCT wheels
Hard composite chassis and shocktowers
Spring steel transmission parts
Gear differential and solid slipper clutch
High performance race geometry
Very long wishbones
Rear motor design
Unique steeringblock design
Big bore 12mm RCM type shocks with dual system
Wide side guards
Highly Efficient Steering ackermann
Adjustable rear differential height
Narrow composite chassis design
Light prepainted and precut SCT body

INTRODUCTION:

Serpent designer Billy Easton, former 1/10 scale 2wd World Champion, and the designer of the successful Cobra 1/8 series of cars, and the Spyder 1/10 RM, MM and SCT, has created this new masterpiece, the rear motor SCT RTR version of the very popular Spyder series

The RTR Spyder SCT  is based  on the high end competition version of the Spyder SCT and shares most components and geometry.   All option parts of the race version alsof fits the RTR version.

PROMOTIONAL VIDEO:

DRAGONRC TRANSMITTER AND RECEIVER:

• The modern full feature 2.4 GHz transmitter , has a large LCD screen to easily change setting as needed.
• Specs DTS-2 Radio Control System
• 3-channel, 2.4GHz, FHHS, Frequency: 2.4G - DC: 9.6V,%150mA, LCD screen - Net weight: 360g
• 3 Channels
• End Point Adjustment
• Supports dual rate function for the STEERING
• Sub-trim for THROTTLE channel and STEERING channel
• Model name can use up to 5 letters and numbers, so recognisable names can be set.
• A model memory with different fine set up scan be created by using the model copy function.
• Sixteen models can be stored
• Anti-skid braking system (A.B.S) This function applies the brakes so that the tires of gaspowered cars do not loose grip on the road even when braking in corners.
• SPEED TH-SPEED Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model not to accelerate smoothly. By setting the throttle speed function, accelleration will be smooth and easy. This also reduces battery consumption.
• ST-SPEED When you sense that the steering servo is too fast, the servo Operatingspeed (direction that limits the maximum speed) can be adjusted.
• Auto-Start function (ATS) A pre-set throttle position, less than full throttle, to be used for the initial acceleration off the line without having wheel spin. When the trigger is released, auto-start is turned off and throttle operates normally again.
• Racing timer (TIMER) The device has two timers: Down-Timer and UP-Timer
• Digital trim function. The current trim position is displayed on the LCD screen.
• Supersmall receiver and a very light unit
• Spread spectrum mode:FHSS
• Channels: 3
• Frequency: 2.4G
• DC: 4.5~5.5v,%30mA
• Net weight: 9.0g

DRAGONRC SPEEDCONTROLLER:

• l programmable electronic speed controller with small footprint
• 45A version, waterproof
• To be used for most brushless motors, bot sensored and sensorless
• To be used with max 2 or 3S lipo, or max 6 cell NIMH
• Optional program card available
• Weight 65 grams only

DRAGONRC MOTOR 9T-3000 KV:

• Powerfull and durabe 9T motor with full alu case
• Brushless, maintenance free version
• Sensorless version with supersmooth response
• With 9-T and 3000 kv offers lots of power and excitement

DRAGONRC SERVO: Part No.: #210004

• Servo digital 0.13s/6.5kg 0352
• A powerfull Dragon-RC servo  for use in 1/10  cars. With a speed of 0.13s and 6.5 kg and metal gears, its a reliable servo for steering applications.

CHASSIS:

Composite chassis plate with a layout allowing for a perfect weight balance, and optimal space for the electronics, battery and servo.  The front Kick-up angle in the Chassis incorporates more clearance for racing and allow for more nose landings

FRONT AND REAR SHOCK TOWERS:

Durable composite front and rear shock towers, with multiple shock angle positions allowing drivers to fine tune for varying track conditions.

SHOCK ABSORBERS:

Dual system 12mm big bore shocks with coated threaded bodies, a unique cap design, a superbly sealing o-ring and spacer package. The Shocks can be used in Bladder or Emulsion setups. The shock-set comes with a set of moulded pistons to choose from.  A selection of 5 springs-sets is available to fine-tune the suspension settings.  Shock Collars with inner o-rings are used on the threaded bodies to set-ride height.

FRONT BUMPER SYSTEM:

The durable composite front bumper system will absorb the worst of head on crashes and will allow safer nose landings.

.

SIDE GUARDS:

The side-guards or nerv-bars are an innovative construction. The sideguards are made wide, so it supports the sides of the body well. The inside of the guards are open, and can be  filled with optional polycarbonate sheets.  In jumps with SC cars you have the ballooning effect, as wind is captured under  the body, losing stability.  The closed section on the Serpent Spyder SC will largely prevent that from happening, creating better balanced jumping and more stability.  The precut polycarbonate sheets  come clear and can be painted in your favourite color scheme too !

FRONT UPPER BULKHEAD:

The front upper bulkhead  supports the upper links and shock tower in the best possible way. The front section offers the option to mount a front sway bar unit

FRONT AND REAR TRACK ROD ENDS:

Spring steel front and rear track rods are mounted to durable composite captured ball joints.  The track Rods have L/R threading for easy adjustments.

FRONT WISHBONES:

The long front Wishbones are made from a super strong composite material. The arms are angled to optimize the CG and pivot on 3mm captured pins on the inside and out. The arms have 2 mounting positions for shock angle and are prepared to use an optional anti-roll bar if needed.

STEERING SYSTEM AND ACKERMANN:

The steering system has a reverse swinging pivot system that optimizes the efficiency through all different types of corners. You have 3 Ackerman choices to choose from.

STEERING BLOCKS:

The steering blocks fit 5x10x4 mm bearings. The steering blocks utilize some of the best high strength materials on the market today.

CASTOR BLOCKS AND SETTINGS:

Caster block inserts come as 0, 2.5 and 5 degree version all of which are included.  The caster blocks are very compact and strong units made from a special composite material.

DIFFERENTIAL:

The gear-differenial  is a super compact, effective and durable unit.  The structure and assembly is common type in this class, but the high quality parts and well functioning will make it stand out.  The height of the diff can be changed with optional inserts.

CLUTCH:

The car features a solid slipper combined with a steel gear, to have a simple and durable system.  The slipper clutch is optional.

REAR UPRIGHTS:

The rear hub uprights use a larger 5x14x4 outer bearing and 10x15x4 mm inner for ultimate lasting performance. The rear uprights utilize some of the best high strength materials on the market today.

The rear uprights allow you to adjust, the toe in from -2 to + 2 degrees by use of various inserts also included in the kit.

WHEEL AXLES AND WHEEL HEX: 

The spring steel wheel-axles utilized 12mm hex adapter to follow current market standards. The front springs steel axle is fixed, while the rear wheel-hex is a composite version.

The battery is mounted perfectly in the center line of the car. Its an exact fit for saddle packs. In case of using a Shorty-pack, it  can be moved to front or back to play with weight balance. Pieces of hard foam are supplied to do so and secure the battery in position. The carbon fibre battery-top-brace has a secure quick release system with handy alu twist nuts.

ANTI-ROLL BARS:

Anti-roll bars can be fitted on the front and rear of the car, but are optional. They can be used on high grip surfaces to further adjust the cars performance

MOTOR PLATE AND MOTOR GUARD:

The motor plate is a machined aluminum; it is then anodized and machined for weight.  The composite motor guard will keep your motor protected even after the hardest of landings.

REAR TRANSMISSION CASE:

The composite rear transmission case is light and durable. It allows the driver to adjust the differential height to each specific condition. It also securely holds the motor plate, differential as well as supports the rear wing mount and rear shock tower.

REAR DRIVESHAFT SYSTEM, WHEEL AXLES: 

The spring steel drive shafts are thin and light, yet durable.  The spring steel wheel-axles are 5mm, light and durable, guided by the 2 different size of bearings, inner 10x14x4 mm and outer 5x13x4 mm. The driveshaft pin is fully captured to prevent any failure. These bearings are for sure to stand up the rigors of any track condition.

REAR SUSPENSION BRACKETS AND TOE IN:

The 3mm spring steel pivot pins are held in place by the suspension bracket made from aluminum.  Inside the bracket you use inserts to set toe-in and roll center. You can adjust the toe-in from 2 to 4 degrees and adjust the anti squat from 0 to 4 degrees.

REAR SUSPENSION ARMS: 

The long and durable angled rear suspension arms are very tough units to withstand the rigors of the track and the hard landings.  The rear arm offers 2 options for shock position and two mounting locations for the rear anti-roll bar if needed.

REAR CHASSIS SKID PLATE: 

The composite rear skid plate connects to the chassis plate. This connection allows you to unclip the rear end in one piece, but helps reduce the total cost of maintenance. It is also made from extremely high strength composite material.

BODYSHELL: 

The light realistic looking Short Course style body, made in top quality clear polycarbonate,  has a nice flowing line, steep front windscreen  for down force . 

REAR BUMPER:

The rear bumper section is a very durable unit, easy to disassembe, and fits well with the rear of the body, to absorb the worst of back-end crashes.

BALLBEARINGS:

High speed sealed stainless steel ballbearings with aeroshell oil

FASTNERS:

Hard steel , mostly allen screws, roundhead and countersunk.  Minimized number of different allen heads to make working on the car easier.

WHEELS: 

Durable white spoked Serpent Short Course wheels

INCLUDED:

The kit comes complete with body and wheels, full color manual and exploded views, a blank and standard set-up sheet and Serpent decals.

SET-UP POSSIBILITIES:

Wheelbase
Caster
Ackerman
Axle height Front
Front and rear camber
Front Toe-in and toe-out
Rear Inboard toe-in angle
Rear Outboard toe-in angle
Antisquat
Roll-centers
Ride height
Weight balance
Shocks for dampening and springs, shock angle
Gear ratios
Anti-roll bar thickness (  option)
Electronic placement

TECH-SPECS:

Length: 540mm (with body) 
Width: 295mm (varies with setup)
Height: 190mm
Wheelbase: 330mm
Gear Ratio: 2.43:1 
Weight: varies with battery used.

OPTION PARTS: Details to follow soon and much more to come..

Front Carbon Shock Tower

Anti Roll Bar Set Front